|
Jing Gong / Golden Bow G36C |
|
|
|
|
Page 1 of 4 Jing Gong / Golden Bow G36C
Disassembly Guide & Mini-Review
by: Kalogerz
Okay, after much hesitation of opening this 'already-good,' 'no-need-to-modify' gun, due to curiosity's sake, I finally decided to take a look on what's inside.
Here's my simple guide on how to disassemble a JG G36C. I'm assuming that you already have a basic knowledge on the parts of an AEG. Don't worry, it's very easy. 
1. Basically, marked here are the only screws (philips & allen screws) that needs to be removed & nothing else.
Remove the foregrip.
2. After removing all the screws, the first part to be removed is the 'magazine well' assembly. Remove the lockpin that holds the magazine well, then press the magazine release lever (1), then lift up the magazine well assembly (2).
3. Remove the Tamiya baby plug connector by pressing its lock from inside the magazine well.
4. Encircled are the 'bolts' that holds the barrel assembly in place, remove those & make sure you don't lose its matching 'nuts' on the other side. Next is for you to pull the barrel assembly outwards to give way to the gearbox assembly.
5. While pulling the barrel assembly, take a look inside your magazine well. Notice that the hopup assembly moves together with the barrel assembly, exposing & freeing up the air nozzle of your gearbox.
6. Now it's time to take out your gearbox assembly as shown.
|
